RVCP 1000 is an extensible design. This consists of extensible enclosure modules of widths 800 or 900mm.  Provision for mounting horizontal Busbar chambers on top OR bottom of the enclosure is provided. Horizontal Busbar chambers come in standard size of 300mm height. A special Busbar chambers of 400mm height for 600mm depth enclosures only is available to accommodate large dimension busbars (over 100mm).

RVCP 2000 is a non extensible design in fixed sizes. This is mainly for independent MCCs or PCCs for general low cost applications. The depth of the enclosure is 300mm, the door widths are limited to 400 and 500mm only. The enclosure is non extensible. The back is fully riveted and no access from back is possible. The enclosure is designed to be fitted against the wall. Connections between feeders and busbars and between cable chambers and feeders is with cables running behind mounting plates only. Standard models available are MODELS   2208, 2218, 2171, 2211

RVCP 3000 is an extensible design for mounting ACB as incomer. It has a standard depth of 1000mm, width of 600 & 800mm. Height to suit the RVCP 1000 to which it is joined. Provision to fit RVCP 1000 with 600mm depth on either side of the enclosure is provided. The enclosure has provision to mount 300 or 400mm height Busbar chamber at top or bottom. Standard models available are MODEL 3605, 3608, 3805, 3808

RVCP 4000 is an extensible power control and distribution panel.This Design is made for mounting ACBs and has widths of 600 and 800mm. Depth is always of 1000mm. A separate horizontal Busbar chamber of 400mm height is provided at top. It is also possible to provide feeders for fuse switches for power distribution. These enclosures are of 600mm width. Vertical Busbar chambers are on side and cable chambers are on the back side.