These are standard accessories for general wiring and other requirements.

These are ‘C’ shaped brackets for supporting terminal channels. Suitable for mounting on component plates of any enclosure. Provide easy convenient access to terminals

Material- 3mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

These are ‘Z’ shaped brackets for supporting terminal channels mounted vertically. Suitable for mounting on indexing angles of HF/RV panels. Provide easy convenient access to terminals.

Material- 3mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

This angle is of specified length for mounting on the terminal bracket. It provides support for terminal channel on one front face & support for plastic cable tray on the other face.

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

These are brackets for mounting of WM, WMR & WM-T boxes. They are fitted on the mounting holes of the box. Can be fitted extended horizontally or vertically. Suitable to carry a weight of 100kg approximately (4Nos. brackets)

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

Angle for supporting the enclosure at top back side. Required for low depth, tall enclosures (Depth 400mm & less, Height 1000mm and above)

Material- 5mm thick HR Sheet

Surface Finish- Black Powder Coating

Wooden Base for transportation can be supplied bolted to the panel bottom. Reduces time & effort for the user to procure & fitting of wooden base for crate packing of completed enclosure. These wooden base are 100mm extra on all sides of the enclosure.