Various types of doors are available to meet specific needs & applications.

These are doors of partial height of the enclosure to separate the enclosure in to two or more parts. Suitable for HF, RV, RVCP panels. Require partitioning channel between two partial doors.

Material- 2mm thick CRCA Sheet

Surface Finish- Powder coated in RAL 7032.

See through widows covered with acrylic sheet or plain glass or toughened glass sheet can be provided on the door with suitable size cutout.

Acrylic sheet 3 to 5mm thick or Plain glass 3 to 5mm thick can be fitted with rubber beading, or clamped from inside

This is a small door with a suitable size cutout for fitting glass/ acrylic. Includes mounting frame. Can be supplied with key lock also. Required for protection of instruments & actuators which protrude from the door surface from unauthorized access & also ingress of dust & liquids.

Material- 2mm thick CRCA Sheet

Surface Finish- Powder coated in RAL 7032

This box is required for covering higher depth actuators on door . The depth of this box can be to customer requirements. Minimum depth 60mm.

Partial door to be fitted inside the panel providing a type of double door construction. Require four cross channels also.

Material- 2mm thick CRCA Sheet

Surface Finish- Powder coated in RAL 7032

This is a cover box fitted from inside the door to cover up instruments and actuators having high voltages. Required for meeting CE norms.

Material- 1.5mm thick CRCA Sheet

Surface Finish- Powder coated in RAL 7032

Side access hinge door can be provided for RV design enclosures instead of screwed side cover incorporates door & door fitting frame. Increases the width of the panel on the side of the door by 30mm. Involves special design. Prior confirmation of suitability of side access door necessary.

Material- 2mm thick CRCA Sheet

Surface Finish- Powder coated in RAL 7032.