Various types of channels & angles are available as accessories, which can be bolted in the enclosure for use of control panel builder. These channels / angles meet various requirements of users.

Cross channels used in HF, RV & RVCP design for fitting depth wise. Used for mounting partial ‘C’ Plate with mounting bracket. Punched with 8mm holes at 25mm pitch.
Available in 25mm and 40mm size.

Material- 2mm thick CRCA Sheet

Surface Finish-     Zinc Plating Yellow Passivation

40-mm CROSS CH

75mm Punch Channels used in HF design for fitting depth wise. Punch with 8mm holes at 25mm pitch. This is heavy-duty channel & is used for supporting heavy components like traffo channels, horizontal trays for ACB mounting & other applications.

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

These channels are fitted width wise in HF & RV design for mounting of transformer, chokes, etc. using universal T-nuts. These can be mounted on 75mm punch cannels also as well as at the bottom. Require mounting brackets for fitting at bottom.

Material-  2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

These are plain channels for heavy-duty applications & mounted at the bottom. Transformers are fitted by drilling holes on these channels. Require mounting brackets for fitting. Used in HF and RV enclosure.

Material-3mm thick CRCA Sheet

Surface Finish- Black Powder Coating

These mounting brackets are used for fitting universal & traffo channels at the bottom of HF panels.

Material- 2mm thick CRCA Sheet

Surface Finish-  Zinc Plating Yellow Passivation

T-Nuts suitable for fitting in Universal Channel available in various sizes M5, M6, M8

Material- Pressure die cast Zinc.

Surface Finish- Zinc Plating White

These are fitted on door support channels. Used for supporting cable trays, cable bunches etc. for door mounted electrical components. Suitable to fit on all doors.

Material- 1.5mm thick CRCA Sheet

Surface Finish-  Zinc Plating Yellow Passivation

This angle is fitted on the support channels to support long depth instruments.
Mounted on the inside of the door just below the instrument cutout.

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

This is a channel fitted on the top of the enclosure provides aesthetic location for screen-printing Users’ logo, name & equipments details, etc. Typical height of channel 60mm.

Material- 1.5mm thick CRCA Sheet

Surface Finish- Powder Coated to match enclosure paint shade

Channels used in HF & RV design for fitting vertically at 25mm pitch of the enclosure depth. Punched with 8mm holes at 25mm pitch. This is heavy-duty channel & are used for mounting horizontal members on both sides for PLC & other applications. Require 8Nos. 40mm Cross Channels for mounting. Provided with 8mm holes at 25mm pitch.

Material-               2mm thick CRCA Sheet

Surface Finish-     Zinc Plating Yellow Passivation

These are plain channels for mounting of 75mm punch vertical channels. Plain surface can also be used for supporting terminal rails & plastic cable trays mounted vertically on the sides of the enclosure. Particularly useful for PLC panels.

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation

These are mounted on 75mm punch channels width wise in the enclosure. They are used for supporting PLC cable trays  & PLC modules. 

Material- 2mm thick CRCA Sheet

Surface Finish- Zinc Plating Yellow Passivation / Powder Coated to Customer needs.